Helios KWL Yoga Style 400 Notice De Montage Et D'utilisation page 45

Installation and Operating Instructions
Decentralised ventilation unit – KWL
4�5 Install internal condensate pump KWL-KP-I (Art� no� 40 472, Accessories)
1. Place the condensate pump in the condensate tray and push into the holder and adjust the holder, if necessary
(see Fig.16 ).
2. Connect the condensate hose to the condensate pump and plug into the inside of the casing opening (see Fig.17).
4�6 Access to the internal terminal box
The electronics are located under the side panel at the main switch (see Fig.18).
1. Remove the side panel (see Fig.7 on page 9).
2. Loosen the cover screws (see Fig.19).
® Yoga Style/KWL
12
® Yoga Style ET
EN
Fig�16
Fig�17
Fig�18
Fig�19