Helios KWL Yoga Style 400 Notice De Montage Et D'utilisation page 41

Installation and Operating Instructions
NOTE
NOTE
Decentralised ventilation unit – KWL
– Preparation
Drill holes for intake/exhaust
1. Measure the position of the wall holes and drill holes (cf. Fig.4).
B
B
A
All dimensions in mm
– Installation
The actual core hole diameter must be adjusted to the duct diameter including insulation�
1. Measure out the position of the ceiling holes for the threaded rods M8 (not included in delivery) (cf. Fig.5).
The clearances between the wall and ceiling holes can be found in the dimension sheets.
The clearances are not symmetrical on both sides for all units.
F C D
All dimensions in mm
2. Drill holes for the threaded rods M8 (see Fig.6). Prepare threaded rods M8 to the appropriate length.
The side panels must be removed to mount the units. Follow these instructions:
® Yoga Style/KWL
E
* Minimal possible clearance between the unit and the wall
8
® Yoga Style ET
KWL Yoga Style 400/ET 1390
A KWL Yoga Style 700/ET 1650
KWL Yoga Style 1000/ET 1920
KWL Yoga Style 400/ET 255
B KWL Yoga Style 700/ET 320
KWL Yoga Style 1000/ET 320
KWL Yoga Style 400/ET 265
C KWL Yoga Style 700/ET 469
KWL Yoga Style 1000/ET 519
KWL Yoga Style 400/ET 627
D KWL Yoga Style 700/ET 469
519
KWL Yoga Style 1000/ET
KWL Yoga Style 400/ET 1836
E KWL Yoga Style 700/ET 2106
KWL Yoga Style 1000/ET 2430
KWL Yoga Style 400/ET
F* KWL Yoga Style 700/ET
KWL Yoga Style 1000/ET 115
EN
Fig�4
Fig�5
26
81
Fig�6