Helios KWL Yoga Style 400 Notice De Montage Et D'utilisation page 42

Installation and Operating Instructions
EN
NOTE
Decentralised ventilation unit – KWL
3. Lift the panelling upwards, pull away to the rear and side. The panelling is secured with auxiliary mounts and magnets (see
Fig.7).
4. Unit with dismantled side panels and panelling and visible brackets (see Fig.8).
5. Lift the unit with a lifting tool and insert it horizontally into the intake/exhaust air connectors.
Do not damage the non-return valves� Ensure that they are seated without tension�
6. Screw the threaded rods M8 from below through the mounting brackets into the prepared dowel holes (see Fig.9).
7. Properly secure the unit and check that it is secure. Check the alignment..
® Yoga Style/KWL
9
® Yoga Style ET
Fig�7
Fig�8
Fig�9
Fig�10