Publicité
Les langues disponibles
Les langues disponibles
English
replaced, this operation must only be carried out by a qualified technician. The socket must be
accessible after the appliance has been placed.
WARNING!
damaged.
WARNING!
supplies at the rear of the appliance.
Product Description
1. Recessed handle
3. Wire basket
5. Drain hole
Before using for the first time
- Remove any exterior and interior packaging materials completely, including the adhesive
strips.
- Before it is connected to the mains, the unit must be thoroughly checked for transport
damage, including its power cord.
- Clean the unit as described in the section "Maintenance and cleaning".
- To ensure proper functioning, wait for about two hours before connecting the unit and
switching it on after it has been positioned.
- When the unit is first switched on, a slight 'new' smell may be noticed. However, this will
disappear once the cooling process has begun.
Setting and selecting the freezer operating temperature
Control panel
1. Temperature setting
➢
Setting:
Press "SET" button, enter the temperature setting mode. The temperature
indicator bar of temperature goes up a scale by each press. This setting runs in cycles.
When positioning the appliance, ensure the supply cord is not trapped or
Do not locate the multiple portable socket-outlets or portable power
2. Freezer compartment
4. Control panel
6. LED light (optional)
6
Publicité
