Note: The coffee strength selected is
then active for all drinks made with
coffee.
Adjusting the fill level
You can adjust the fill level of your
drinks.
Place a cup under the outlet
1.
system.
Press and hold
2.
button for 3 seconds.
a Dispensing takes place, with the
button selected flashing.
Once the required fill level is
3.
reached, press the button selected
to stop.
Notes
¡ The new fill level is only apparent
when the next drink is dispensed.
¡ You can set the fill level between
0.8-2 oz. (25-60 ml) for espresso or
2.7-6.8 oz. (80-200 ml) for coffee.
¡ The appliance always brews a
minimum quantity of approx. 0.8 oz.
(25 ml) for espresso and approx. 2.7
oz. (80 ml) for coffee.
Tip: You can change the settings at
any time.
→ "Basic settings", Page 20
Adjusting the frothing time
You can adjust the frothing time of
your drinks.
Fill a large cup or large glass with
1.
approx. 3.4 oz. (100 ml) milk for
cappuccino or approx. 5.1 oz.
(150 ml) milk for latte macchiato.
Place the cup or glass under the
2.
outlet system.
Slide the outlet system and milk
3.
frother right down.
a The milk is frothed up, and the
or
Press and hold button
4.
button selected flashes.
Once the required frothing time is
5.
reached, press the button selected
to stop.
Notes
¡ You can set a limited time
depending on the drink.
¡ The setting for the frothing time has
no impact on the fill level.
Tip: You can change the settings at
any time.
→ "Basic settings", Page 20
Grinder
8 Grinder
Your appliance has an adjustable
Grinder
grinder, which you can use to
customize the right coffee grind size of
your coffee beans.
8.1 Setting the grinding level
Set the required grinding level while
the coffee beans are being ground.
WARNING
The grinder rotates.
Never reach into the grinder.
▶
NOTICE:
Risk of damage to the grinder. The
grinder may be damaged if the
grinding level is not set properly.
Only set the grinding level when the
▶
grinder is running.
Select the grinding level step by
▶
step using the rotary selector.
Grinder en-us
or
for 3 seconds.
,
19