Bosch 300 Serie Manuel D'utilisation page 23

Tips
¡ Wash new sponge cloths thoroughly
to remove any salt adhering to
them. Salt can cause rust film to
develop on stainless steel surfaces.
¡ Always remove any residues of
limescale, coffee, milk and cleaning/
descaling solutions immediately to
prevent corrosion.
10.3 Cleaning the appliance
WARNING
Moisture intrusion may cause an
electric shock.
Never immerse the appliance or the
▶
power cord in water.
Liquids must not be spilled on the
▶
appliance plug connection.
Do not use any steam cleaners or
▶
high-pressure cleaners to clean the
appliance.
WARNING
Some parts of the appliance become
very hot.
Never touch hot appliance parts.
▶
Allow hot appliance parts to cool
▶
down before touching.
Disconnect the appliance from the
1.
power supply.
Clean the housing, the high-gloss
2.
surfaces and the control panel with
a microfiber cloth.
Clean the outlet system with a soft,
3.
damp cloth after beverages have
been dispensed.
Rinse the water tank with fresh,
4.
clean water.
Cleaning and maintenance en-us
If the appliance has not been used
5.
for a long time, e.g. after a vacation,
clean the entire appliance, including
moving parts such as the brewing
unit or water tank.
Note: The appliance will rinse itself
automatically if you switch it on when it
is cold or switch it off after it has
dispensed coffee. In other words the
system cleans itself.
10.4 Cleaning the drip tray
and coffee dregs con-
tainer
Clean and empty the drip tray and
coffee dregs container every day to
prevent deposits.
Open the brewing chamber door.
1.
Pull the drip tray and the coffee
2.
dregs container forward and out.
23