Bimar THE WALL PTC-3010R Notice D'instructions page 19

1) Before to insert the plug into the socket, please verify that the main
switch is in pos. "0".
2) Insert the plug into the socket.
3) Switch on the main switch (pos."I").
4) Select the desired function:
using the keyboard or remote control, press the "
ventilation (
regulate the power to 1000W, (
remote control (
press of the key, the desired function lights up.
5) To switch off the fan heater, run just the fan for around 3 minutes to
cool the resistance (in this way it will have a longer life); press the
"ON/OFF" key of the remote control or of the keyboard.
At the end of use, completely switch off the appliance using the main
switch (pos."0") located on the side.
For long periods of inactivity, remove the plug from the power socket.
CLEANING AND MAINTENANCE
Attention: before cleaning the appliance, switch off, unplug and
wait for before it has completely cooled down.
• To clean the body use a soft damp cloth; do not use abrasive
products.
• Do not submerge any part of the heater in water or other liquids; if
this should happen, do not put your hands into the liquid, firstly
remove the plug from the power socket. Carefully dry the appliance
and check that all the electrical parts are dry: if in doubt, contact
professionally qualified personnel.
• From time to time clean the grid to remove fluff, dust or other
deposits, to improve the performance. Use a vacuum cleaner or a
cloth.
• If you decide not to use the appliance any more, we recommend
making it inoperative by cutting the power cord (after making sure
you have disconnected the plug from the socket) and make
dangerous parts harmless if children are allowed to play with them.
• Used batteriy of the remote control must be disposed of at
appropriate collection centres at your local authority or in suitable
containers. In this way, local laws will be respected.
); keyboard key "MODE" or remote control (
) to regulate the power to 2000W, (
) and keyboard key "MODE" or
19
" to start
) to
); at each