Publicité
Les langues disponibles
Les langues disponibles
• Make sure that the air-intake grid is not obstructed by objects, fabrics
or anything else to avoid the heater overheating or breaking.
• In the case of a breakdown or fault, switch off the appliance and have
it checked by a professionally qualified technician; repairs made by
unqualified persons can be dangerous and render void the warranty.
DESCRIPTION OF THE APPLIANCE
USE
The fan can be used for ventilation alone or for heating; it is provided
with a highly efficient ceramic resistance, which by itself reduces power
consumption as the ambient temperature rises.
It is equipped with the following regulation elements, used by pressing
the buttons located below the control panel or the ones on the remote
control. The remote control must be aimed in the direction of the
display next to the switches; before using the remote control, insert its
batteries (open the rear hatch and insert 2 "AAA" type batteries
respecting the polarity). In detail, the settings are:
• main (I/0) switch. Every time you finish using the fan heater, switch it
off with this switch (pos. "0").
• keyboard key "ON/OFF" or remote control to start ventilation (
• keyboard key "MODE" or remote control (
to 1000W, (
• keyboard key "MODE" or remote control (
to 2000W, (
• timer key ("TIMER" of the remote control and of the keyboard) to
start the timer, which stops the appliance at the end of the time:
intervals of 30 minutes can be set, up to a maximum of 7h 30'.
The control panel has a series of luminous LEDs, each to indicate the
functions selected.
To use the fan heater, act as follows:
)
)
A. Main (I/0) switch
B. Grille outair
C. Selection button
D. Control Panel
E.
Timer button
F.
Remote control
G. Air ventilation button
) to regulate the power
) to regulate the power
18
)
Publicité
