General Safety Rules - Ryobi RBC30SET Manuel D'utilisation

GB
F D E I P
WARNING: To reduce the risk of injury, the user
must read and understand the operator's manual
before using this product.
SAVE THIS MANUAL FOR FUTURE
REFERENCE
Your brush cutter has been engineered and manufactured
to our high standard for dependability, ease of operation,
and operator safety. Properly cared for, it will give you
years of rugged, trouble-free performance.

GENERAL SAFETY RULES

WARNING:
Read and understand all instructions. Failure to
follow all instructions listed may result in electric
shock, fire and/or serious personal injury.
READ ALL INSTRUCTIONS
For safe operation, read and understand all
■
instructions before using this product. Follow all safety
instructions. Failure to follow all safety instructions
listed below can result in serious personal injury.
Do not allow children or untrained individuals to use
■
this unit.
Never start or run the engine in a closed or poorly
■
ventilated area; breathing exhaust fumes can kill.
Clear the work area before each use. Remove all
■
objects such as rocks, broken glass, nails, wire, or
string which can be thrown or become entangled in
the cutting line or blade.
Wear safety glasses or goggles that are marked to
■
comply with EN 166 standard when operating this
product.
A battery operated tool with integral batteries or a
■
separate battery pack must be recharged only with
the specified charger for the battery. A charger that
may be suitable for one type of battery may create a
risk of fire when used with another battery.
Use battery operated tool only with specifically
■
designated battery pack. Use of any other batteries
may create a risk of fire.
Use battery only with charger listed.
■
MODEL BATTERY PACK
RBC30SET BPH-1215
(RBC30SBT)
RBC30SET BPH-1215
(RBC30SBT)
Wear heavy, long trousers, boots, and gloves. Do
■
not wear loose fitting clothing, shorts, sandals, or go
barefoot. Do not wear jewellery of any kind.
NL S DK N FIN GR HU
English
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
CHARGER
BCAH-120-S
(only for British
■
market)
BCAH-120
16 16
CZ RU RO PL SLO HR TR EST LT
Heavy protective clothing may increase operator
fatigue, which could lead to heat stroke. During
weather that is hot and humid, heavy work should be
scheduled for early morning or late afternoon hours
when temperatures are cooler.
Never operate this unit on the operator's left side.
Secure long hair above shoulder level to prevent
entanglement in moving parts.
Keep all bystanders, children, and pets at least 15m
away. Bystanders should be encouraged to wear eye
protection. If you are approached, stop the engine
and cutting attachment. In the case of bladed units,
there is the added risk of injury to bystanders from
being struck with the moving blade in the event of a
blade thrust or other unexpected reaction of the tool.
Do not operate this unit when you are tired, ill, or
under the influence of alcohol, drugs, or medication.
Do not operate in poor lighting.
Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance or
exposure to hot surfaces.
Keep all parts of your body away from any moving
part.
To avoid hot surfaces, never operate the unit with the
bottom of the engine above waist level.
Do not touch area around the muffler or cylinder of
the unit, these parts get very hot from operation.
Always stop the engine and remove the spark plug
lead before making any adjustments or repairs except
for carburettor adjustments.
Inspect the unit before each use for loose fasteners,
fuel leaks, etc. Replace any damaged parts before
use.
The cutting attachment should never rotate at idle
during normal use. The cutting attachment may rotate
at idle during carburettor adjustments.
Mix and store fuel in a container approved for petrol.
Mix fuel outdoors where there are no sparks or
flames. Wipe up any fuel spillage. Move 10m away
from refuelling site before starting the engine. Slowly
remove the fuel cap after stopping engine. DO NOT
SMOKE when refuelling.
Stop the engine and allow it to cool before refuelling
or storing the unit.
Allow the engine to cool; empty the fuel tank and
secure the unit from moving before transporting in a
vehicle.
Wear protective equipment and observe all safety
instructions. For units equipped with a clutch, be sure
the cutting attachment stops turning when the engine
idles. When the unit is turned off make sure the
cutting attachment has stopped before the unit is set
down.
LV SK BG