Sharp AY-AP09DE Notice D'utilisation page 10

All manuals and user guides at all-guides.com
BASIC OPERATION
MODE TEMP.
FAN TIMER
TEMP.
DISPLAY MODE
1h FAN
SWING CANCEL
Press the MODE button to select the
1
operation mode.
Press the ON/OFF button to start op-
2
eration.
• The red OPERATION lamp (
unit will light.
2
Press the THERMO. button to set the
3
5
desired temperature.
3
AUTO/DRY MODE
The temperature can
be changed in 1°C in-
1
crements within the
range of 2°C higher to
4
2°C lower from the tem-
perature automatically
determined by the air
conditioner.
COOL/HEAT MODE
The temperature can
be set within the range
of 18 to 32°C.
FAN ONLY MODE
The temperature set-
ting cannot be made.
Please the FAN button to set the de-
4
sired fan speed.
AUTO
• In the DRY mode, the fan speed is pre-
set to AUTO and cannot be changed.
• In the FAN ONLY mode, the fan speed
cannot be set to AUTO.
To turn off the unit, press the ON/OFF
5
button again.
• The red OPERATION lamp (
unit will turn off.
E-8
AUTO HEAT COOL DRY FAN ONLY
SOFT LOW
) on the
HIGH
) on the