Repair Service; Technical Data; Disposal And Recycling; Eu Declaration Of Conformity - stayer GAV2800 Instructions D'emploi

gb
4.9 EQUIPMENT STORAGE
Before storing the unit for an extended period: Be
sure the storage area is free of excessive humidity and
dust. Drain the fuel.
Gasoline is extremely flammable and
explosive under certain conditions. Do not
smoke or allow flames or sparks in the
area.
Completely drain the fuel from the tank. Open the
fuel valve, start the engine and operate it in the idle
position until all remaining fuel is gone and the engine
stops automatically.
Discharge oil.
Remove spark plug and fill cylinder with 2cc's fresh oil.
Pull start motor 3-4 times to discharge the remaining
oil. Then reinstall the spark plug.
Pull the starting cord slowly until resistance is strong.
At this time, the piston is moving to the top of the
compression stroke and the valves will be closed.

4.10 REPAIR SERVICE

Our after-sales service responds to your questions
concerning maintenance and repair of your product as
well as spare parts. Exploded views and information
on spare parts can also be found under:
info@grupostayer.com
Our customer consultants answer your questions
concerning best buy, application and adjustment of
products and accessories.
4.11 WARRANTY
Warranty card
Included in the documentation that accompanies this
equipment, you should find the warranty card. You
should fill out the card completely and return to vendor
with a copy of purchasing receipt or invoice and you
should receive a receipt.
Note: If you cannot find the warranty card within
the documentation, you must ask for it through
your supplier.
The warranty is limited only to manufacturing
defects and expire if pieces have been removed or
manipulated or repaired other than the manufacturer.

4.12 DISPOSAL AND RECYCLING

The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into household waste!
According the European Guideline 2002/96/
EC for Waste Electrical and Electronic
Equipment and its implementation into
national right, power tools that are no longer
usable must be collected separately and
disposed of in an environmentally correct
manner.
Subject to change without notice.
5_REGULATIONS

5.1 TECHNICAL DATA

= Rated power input
KW
= Nominal current
A
= Output DC Voltage
V
= Autonomy
= Weight
Kg
= Maximum power
KW
CC
= Displacement
= Oil capacity
= Fuel capacity
L = Sound power level
WA
L = Sound pressure level
PA
= Vibration

5.2 EU DECLARATION OF CONFORMITY

The undersigned: STAYER IBERICA, S.A.
With address at: Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: +34 902 91 86 81 / Fax: +34 91 691 91 72
CERTIFIES
We declare under our sole responsibility that this
product is in conformity with the following standards
or standardized documents: UNE EN12601:2011,
UNE EN61000-6-1:2007, UNE EN61000-6-3:2007/
A1:2012, EN60745 according to EU Regulations
2006/95/CE, 2004/108/CE, 2006/42/CE, 2005/88/CE.
- 24 -
Ramiro de la Fuente
Managing Director
June 2019