Bosch 800 Serie Manuel D'utilisation page 23

Home Connect has been set up and
whether the appliance is connected to
your home network.
Overview of the Home Connect settings
Here is an overview of the Home Connect settings and network settings.
Basic setting
Wi-Fi connection
Remote start
Add mobile device -
Network informa-
tion
Delete network
settings
Software update
12.4 Remote diagnostics
The Customer Service can access
your appliance via Remote Diagnostics
if you ask them to do so, if your
appliance is connected to the
Home Connect server and if Remote
Diagnostics is available in the country
where you are using the appliance.
Tip: Further information and details
about the availability of Remote
Diagnostics in your country can be
found in the Service/Support section of
your local website: www.home-
connect.com.
Select
On
Off
On
Off
-
-
-
Description
Switch off the wireless module during
long absences or to save energy.
Note: In networked standby mode your
appliance requires max. 2 W.
Switch remote start on the appliance on
and off.
Note: With the Home Connect app only
switch-off is possible.
Connect the appliance to the "Home
Connect" app or additional accounts.
Display network information and
appliance information.
Note: You cannot operate your
appliance via the "Home Connect" app
without a network connection.
Note: This setting is only available with
a software update.
12.5 Data Protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
installed Wi-Fi communication
module).
Home Connect en-us
23