Bosch 800 Serie Manuel D'utilisation page 22

en-us Home Connect
Home Connect
12 Home Connect
This appliance is network-capable.
Home Connect
Connecting your appliance to a mobile
device lets you control its functions via
the Home Connect app, adjust its
basic settings and monitor its
operating status.
The Home Connect services are not
available in every country. The
availability of the Home Connect
function depends on the availability of
Home Connect services in your
country. You can find information on
this at: www.home-connect.com.
To be able to use Home Connect, you
must first set up the connection to the
WLAN home network (Wi-Fi
the Home Connect app.
The Home Connect app guides you
through the entire registration process.
Follow the instructions in the
Home Connect app to implement the
settings.
Tip: Follow the instructions in the
Home Connect app as well.
Notes
¡ Also note the safety information in
this instruction manual and ensure
that it is also observed when
operating the appliance using the
Home Connect app.
→ "Safety", Page 4
¡ Operating the appliance on the
appliance itself always takes
priority. It is not possible to operate
the appliance using the
Home Connect app during this time.
1 Wi-Fi is a registered trade mark of the Wi-Fi Alliance.
22
12.1 Setting up the
1.
2.
12.2 Setting up Home Con-
Requirements
¡ The Home Connect app is installed
¡ The appliance receives signals from
1 ) and to
1.
2.
12.3 Home Connect settings
Adapt Home Connect to your needs.
You can find the Home Connect
settings in the basic settings for your
appliance. Which settings the display
shows will depend on whether
Home Connect app
Install the Home Connect app on
your mobile device.
Start the Home Connect app and
set up access for Home Connect.
The Home Connect app guides you
through the entire registration
process.
nect
on your mobile device.
the WLAN home network (Wi-Fi) at
its installation location.
Open the Home Connect app and
scan the following QR code.
Follow the instructions in the
Home Connect app.