Bosch 800 Serie Manuel D'utilisation page 17

6.3 Water filter
You can use a water filter to minimize
limescale deposits and reduce
impurities in the water.
Insert water filter
NOTICE:
Possible damage to the appliance due
to limescale build-up.
Change the water filter at the
▶
correct time.
Change the water filter after
▶
2 months at the latest.
Observe the display messages.
▶
Press ⁠ .
1.
Select "INTENZA filter" and follow
2.
the instructions on the display.
Changing or removing the water
filter
You can also operate your appliance
without a water filter.
Press ⁠ .
1.
Select "INTENZA filter".
2.
Select "Replace" or "Remove" and
3.
follow the instructions on the
display.
Tips
¡ You should also change your water
filter for sanitation reasons.
¡ With a water filter you need to
descale your appliance less
frequently.
¡ If you use a water filter, your coffee
will be more flavorful.
¡ If your appliance has not been used
for a long time, for example if you
were on vacation, you should rinse
the water filter before use by
dispensing a cup of hot water.
Before using for the first time en-us
¡ The water filter can be purchased
from retailers or customer service.
→ "Accessories", Page 12
6.4 Performing initial start-up
After connecting the appliance to the
power supply, configure the settings
for initial start-up. Initial start-up only
appears when switching on for the first
time.
Press to switch the appliance on.
1.
Follow the instructions on the
2.
display.
a The display will guide you through
the cycle.
Notes
¡ If you want to set up Home Connect
now, follow the instructions in the
Home Connect app.
→ "Setting up Home Connect",
Page 22
¡ If "Demo mode" is selected, only the
display screens will work. You
cannot dispense a beverage or run
a cycle.
6.5 General instructions
Please bear this information in mind so
that you can get the best out of your
appliance.
Notes
¡ The appliance has been
programmed at the factory with
standard settings for optimum
operation.
17