Publicité
Les langues disponibles
Les langues disponibles
Technical Description
2.
Safety notes
2.1 Intended use
The only design intent of the ac-
tuator is the automatic setting of
the Oventrop ball valve "Optibal
TW". Any use of the actuator
outside this application will be
considered as non-compliant.
Modifi cations to the actuator are
not allowed.
2.2 Personnel qualifi cation
Installation of the actuator must
only be carried out by a qualifi ed
electrician with due consider-
ation of the relevant standards
and national regulations.
8
Actuator 24 V for "Optibal TW"
3.
Technical description
3.1 Construction
1
Keyhole for manual
respectively currentless
setting of the ball valve
2
Release button for manual
setting
3
Power supply 24 V
3.2 Technical data
Fig. 1
1
2
3
Publicité
