Garland Roll&Comb 302E Manuel D'instructions page 29

English
8. TROUBLESHOOTING
Depending on the symptoms detected you can probably find the cause of the problem and find a solution.
PROBLEM CAUSE ACTION
Machine not connected to mains Connect to mains
Cable damaged Take to service agent
Engine does not work
Damaged switch Take to service agent
Worn out brushes Take to service agent
Overload protection activated Allow the machine to cool 15 minutes
Unplug the machine, remove elements
Blocked comber
blocking the blades
Abnormal noises
Transmission with little grease Take to service agent
Screws and nuts of blades loose Check and tighten
Comber damaged Take to service agent
Abnormal vibrations
Internal engine or transmission problem Take to service agent
In any other case, take the machine to your nearest after sales service.
29/100