Garland Roll&Comb 302E Manuel D'instructions page 28

English
Attention! Always keep an eye as to where the
electric cable is whilst working. Be careful and
ensure that your feet or any object get tangled with
the cable.
6.2. ADJUSTING THE WORKING HEIGHT
Attention! Stop the machine and wait for
the comber to stop before adjusting the height
adjustment. The comber need a few moments to stop
completely after stopping the engine.
Attention! Avoid overexertion on your machine.
Always adjust the brush to the highest possible height
where you see the grass being clean and lifted.
To regulate the height adjustment, press the lever
outwards and move it or up or down to the desired spot.
7. MAINTENANCE AND SERVICE
The removal of the security measures, an
inappropriate maintenance, the substitution of parts
by non original spare parts and accessories could
result in severe body harm.
Always carry out maintenance work or servicing
with the machine unplugged from the mains.
Unplug the machine before carrying out any
maintenance work. Read the instruction manual
before carrying out any work.
Carry out periodic checks on the machine to
ensure its correct functioning. For a complete check
up, we recommend you take the machine to your after
sales dealer.
Keep the machine clean, specially the engine air
vents.
7.1. CLEANING
Clean the comber with a damp cloth. Never use water,
petrol or other liquids when cleaning the machine.
You can use water on the catcher as long as you
separate the catcher from the machine at a distance
from the machine. Dry the catcher completely before
placing again on the machine.
7.2. CONTROL OF THE ELECTRIC CABLE
Inspect the cable for possible damages. If the cable
is not in a good condition, take the machine to your
nearest service agent.
Do not use the machine if the cable is
damaged.
28/100