Publicité
Les langues disponibles
Les langues disponibles
Getting started
CONTROL PANEL - Model GBT412/632 Series
1
Power Button
Switch on / off the power by pushing.
Cycles Button
To select the program by pushing.
Options Button
To select a function after setting a program.
Delay Start Button
To set the delay start time, showing in the display
window as H01- H24.
Start/Cancel Button
When the program and options have been selected,
make sure the door is closed press the START/ CANCEL
button. To stop or reset the wash cycle, press the START/
CANCEL button, the dishwasher will stop washing.
Note: Once the Start button is pressed and the door is
closed, the dishwasher will start operating within a few
seconds.
Wash Cycle selections
Rinse Aid. When the indication lights are on, please refill
the detergent from the hole located on the dispenser.
Sanitized.
Clean.
Display - Wash Cycle selections
Auto. Auto sensing wash, lightly, or heavily soiled
crockery, with or with out dried-on food
Heavy. This cycle is for hard-to-clean, heavily soiled
dishes, pots, pans, and dishes.
29-6273
6
2
8
3
4
Normal. For regularly soiled dinner dishes or silverware.
ECO. This is a standard program, suitable to clean
normally soiled tableware and is the most efficient
program in terms of combined energy and water
consumption for that type of tableware.
China/Crystal. For lightly soiled loads, such as glasses,
crystal and fine china.
90 mins. Lightly soiled plates and pans that need a
quick wash.
Speed. Shorter wash for lightly soiled loads that do not
need drying.
Rinse. Use for rinsing dishes glasses and silverware that
will not be wash right away.
Options
Heated Dry. When the Heated Dry function is selected,
the heater will work during the drying process.
Sanitize. When the"Sanitize"function is selected,
the temperature of water will be maintained at 69°C
(156.2°F) max. The max. temperature may not be
reached if the incoming water temperature
is not correct. Certified residential dishwashers are not
intended for licensed food establishments.
TIPS： The sanitize option is available with
Nomal, Heavy and Energy cycles.
Hi Temp. When the Hi Temp function is selected, the
temperature of the water will be maintained at 60°C
(140°F) max.
7
5
9
Publicité
