Chamberlain LiftMaster SECURITY+ ELITE Serie Manuel D'utilisation page 5

Carton Inventory
Your garage door opener is packaged in two cartons
which contain the motor unit and all parts illustrated
below. Accessories will depend on the model purchased.
L O C
K
L I G
H T
Smart Control Panel TM
Motion Detecting
Door Control Panel
2-Conductor Bell Wire
White & White/Red
Safety Sensor
Bracket (2)
INSTALLATION HARDWARE
Hex Bolt 5/16"-18x7/8" (4)
Hex Screw #8 x 3/8" (2)
Lag Screw 5/16"-9x1-5/8" (2)
Lag Screw 5/16"-18x1-7/8" (2)
Clevis Pin 5/16"x2-3/4" (1)
Clevis Pin 5/16"x1-1/4" (1)
Clevis Pin 5/16"x1" (1)
Nut 5/16"-18 (4)
Lock Washer 5/16" (4)
Screw 6ABx1-1/4" (2)
®
SECURITY
SECURITY ®
3-Button Remote Control
3-Button Remote Control
Motor Unit w/Light Lenses
Trolley
Belt
Pulley Bracket
(2) Safety Reversing Sensors
The Protector System
(1 Sending Eye and 1 Receiving Eye)
(2) Safety Reversing Sensors
with 2-Conductor White & White/Black
(1 Sending Eye and 1 Receiving Eye)
Bell Wire attached
with 2-Conductor White & White/Black
Bell Wire attached
If anything is missing, carefully check the packing
material. Parts may be stuck in the foam. Hardware for
installation is also listed below.
Remote Control
Transmitter Visor Clip
Belt
One-Piece
Rail
Header Bracket
®
Self-Threading Screw 1/4"-14x5/8" (2)
Screw 6-32x1" (2)
Insulated Staples (30)
Ring Fastener (3)
Drywall Anchors (2)
Rope
Handle
Rail Grease
Carriage Bolt 1/4"-20x1/2" (2)
Wing Nut 1/4"-20 (2)
5
Belt Cap Retainer
Styrofoam
Door Bracket
Curved Door
Arm Section
Straight Door
Safety Labels Arm Section
and
Literature