Kapro PROLASER ELECTROTA 8991 Manuel D'utilisation page 16

Using the Remote Control
The laser can be operated by an infra-red remote control.
The remote control will only work if there is an uninterrupted line
of sight between the infra-red control and the remote control
sensor, on the control panel.
The effective range of the remote control is 20m.
The Remote Signal Indicator flashes when a signal has been
sent.
1. Remote Signal Indicator
2. Rotation speed control button
3. Scanning mode control button
4. Rotation right button
5. Rotation left button
6. Manual/Automatic mode button
7, 8. X-AXIS
9, 10. Y-AXIS
16