Sony MEX-BT4100U Mode D'emploi page 25

Handsfree calling
Once the unit is connected to the cellular
phone, you can make/receive handsfree
calls by operating this unit.
Before handsfree calling, check the
following:
 Make sure that " " and " " appear in
the display.
 If " " and " " do not appear, perform
the connection procedure (page 23).
 If you cannot connect this unit and the
cellular phone via the Bluetooth
function, perform the pairing procedure
(page 22).
Receiving calls
When receiving a call, a ringtone is output
from your car speakers or the connected
cellular phone. The caller's name or phone
number appears in the display.
1 Press  when a call is received
with a ringtone.
The phone call starts.
Notes
• Depending on the cellular phone, the caller's
name may appear.
• The ringtone and talker's voice are output only
from the front speakers.
Rejecting a call
Press and hold  for 1
second.
Ending a call
Press  again.
Calling from the phonebook
When connecting to a cellular phone
supporting PBAP (Phone Book Access
Profile), you can access the phonebook, and
make a call.
1 Press  and rotate the control
dial until "PHONEBOOK" appears,
then press it.
2
Rotate the control dial to select an
initial from the initial list, and then
press it.
3
Rotate the control dial to select a name
from the name list, and then press it.
4
Rotate the control dial to select a
number from the number list, and then
press it.
The phone call starts.
Note
Depending on the cellular phone, contacts
displayed on the unit may differ from the
phonebook of the cellular phone.
Calling from the call history
When connecting to a cellular phone
supporting PBAP (Phone Book Access
Profile), you can access to the call history
stored in the cellular phone, and make a
call.
1 Press  and rotate the control
dial until "RECENT CALL" appears,
then press it.
A list of the call history appears.
2
Rotate the control dial to select a name
or phone number from the call history,
then press it.
The phone call starts.
25