Télécharger Imprimer la page

Siemens KIN86HD30 Notice D'utilisation page 48

Publicité

Les langues disponibles
  • FR

Les langues disponibles

en Faults – what to do?
Preventing noises
Appliance is not level: Align appliance
using a spirit level. If required, place a
little packing underneath.
3
Faults – what to do?
Before you call customer service, use this table to check whether you can rectify the
d o ?
F a u l t s – w h a t t o
fault yourself.
Temperature differs greatly from the set value.
Displays do not illuminate.
The mains plug has not been inserted properly.
The fuse has tripped.
The power has failed.
Display indicates "E...".
Electronics have detected a fault.
A warning signal sounds and the alarm button is lit.
Appliance door is open.
Ventilation openings have been covered.
Large quantities of fresh food were placed in the
appliance.
48
Containers, shelves or storage
compartments wobble or stick: Check
the removable fittings and re-insert if
required.
Bottles or receptacles are touching
each other: Move bottles or receptacles
away from each other.
Switch off appliance for 5 minutes.
~ "Switching off and disconnecting the appliance"
on page 37
If the temperature is too warm, check temperature
again after a couple of hours.
If the temperature is too cold, check temperature
again on the following day.
Connect the mains plug.
Check the fuses.
Check whether the power is on.
Call the after-sales service.
~ "Customer service" on page 50
Press the alarm button. Alarm is switched off.
Close the appliance door.
Clear ventilation openings.
Do not exceed max. freezing capacity.

Publicité

loading

Ce manuel est également adapté pour:

Kin serie