Publicité
Les langues disponibles
Les langues disponibles
en Home Connect
Press button </> freezer
3.
compartment.
The appliance is ready for the
automatic connection.
Freezer compartment temperature
display shows an animation for
2 minutes.
The appliance is ready for the
automatic connection for as long as
the animation is displayed.
Within those 2 minutes, activate the
4.
WPS function on the home network
router (e.g. using the
WPS/WLANbutton; observe
information on this topic in the router
documentation).
If the connection is successful, On
flashes up in the freezer
compartment temperature display.
The refrigerator is ready to connect
with the app.
If the freezer compartment
Note:
temperature display shows OF, no
connection could be established.
Check whether the refrigerator is
1.
located within the range of the home
network (WLAN).
Repeat the process or establish the
2.
connection manually.
Manual connection with the home
network (WLAN)
If the WLAN router present does not
have aWPS function, or if this is
unknown, you can manually connect the
refrigerator with the home network.
Press the | button.
1.
The refrigerator compartment
temperature display shows Cn.
Press button </> refrigerator
2.
compartment until the refrigerator
compartment temperature display
shows SA and the freezer
compartment temperature display
shows OF.
40
Press button </> freezer
3.
compartment.
The appliance is ready for the
manual connection.
The freezer compartment
temperature display shows an
animation.
The appliance is ready for the
manual connection for as long as
the animation is displayed.
The refrigerator has now set up its
4.
own WLAN network with the network
name HomeConnect.
You can now access this network
with your mobile device.
Call up the WLANsettings in the
5.
settings menu of the mobile device.
Connect the mobile device with the
6.
WLAN network HomeConnect.
Password: HomeConnect
It can take up to 60 seconds to
establish the connection.
After successfully connecting, open
7.
the Home Connect app on the
mobile device.
The app will search for the
refrigerator.
As soon as the refrigerator has been
8.
found, enter the network name
(SSID) and the password (Key) of
your own home network (WLAN) into
the corresponding fields.
Confirm with the button Transmit to
9.
domestic appliances.
If the connection is successful,
–
On flashes up in the freezer
compartment temperature
display.
You can now connect the
refrigerator with the app.
If the freezer compartment
–
temperature display shows OF,
no connection could be
established.
Check whether the refrigerator is
located within the range of the
home network (WLAN).
Repeat the process.
Publicité
