Publicité
6 Cleaning and maintenance
When the dust bag is not installed inside the station, automatic dust collection operation shall
C
not be started when the robot vacuum cleaner returns to the station after the vacuuming
operation. When a dust bag is not available, the dust inside the dust container shall be
removed manually.
Make the provision of the dust bag in the charging stand from the authorized service.
C
Incompatible and inappropriate bags that you will use in the charging stand of the robot
vacuum cleaner may damage the charging stand and your robot vacuum cleaner.
The damage and the reparations caused by the unoriginal dust bags which are used in the
charging stand are not under warranty.
6.3 Cleaning of the brush
1. Open the upper cover of the main brush by pressing on the tabs. Pull and remove the main roll up-
wards. Cut the hair lapped on the roller brush with the cutting and sharp side of the cleaning brush.
Then clean the dusts on the roller brush with the bristles of the cleaning brush.
2. Replace the brush after cleaning it and close the cover in the direction of the arrow.
24 / EN
Robot Vacuum / User Manual
Publicité
