Publicité
5 Operation
5.4.2 Wet mopping setting
You may start the cleaning operation by selecting the cleaning mode and set the level of wetness during
mopping as desired in the application.
It is advised that you remove your carpets or you add a virtual wall (mop prohibited area) to the carpet
area on the application in order to keep the vacuum cleaner away from the carpet to prevent the wetting
of the carpet by the robot vacuum cleaner during the mopping operation.
6 Cleaning and maintenance
Turn off the appliance and unplug it before cleaning it.
A
WARNING: Never use gasoline, solvent, abrasive cleaners,
metal objects or hard brushes to clean the appliance.
6.1 Cleaning the dust container and filters
C
You may call our call center to order a new filter when your filter reaches the end of its
expected life, is deformed or needs to be replaced for a reason.
To achieve the maximum performance with EPA filter, clean it with a brush after each
cleaning.
C
EPA filter is a replaceable accessory.
If you performed a cleaning operation in a space where there is construction dust and dust
with very tiny particles, replace your filter with a new one in order not to experience a loss
of performance.
1. Remove the dust container and the water tank assembly (2 in 1) by pressing the button as shown
below.
Robot Vacuum / User Manual
21 / EN
Publicité
