Publicité
Les langues disponibles
Les langues disponibles
MALFUNCTIONS
Steam escapes from the door or the vents.
•
This is normal.
Clicking sounds can be heard when the oven is working, particularly in the defrost setting.
•
This is normal.
The circuit breaker switches off regularly.
•
Consult a service technician.
The display gives an error code, ERROR XX ...(XX indicates the number of the error).
•
There is a fault in the electronic module. Disconnect the appliance from the power supply for
a few minutes. Then reconnect it and set the current time.
•
Consult a service technician if the error persists.
Storing and repairing the oven
•
Repairs should only be performed by a qualified service technician. If maintenance is
required, take the plug from the socket and contact the Atag customer service.
Have the following information to hand when you call:
•
The model number and serial number (stated on the inside of the oven door)
•
Guarantee details
•
A clear description of the problem
Choose a clean, dry place if you have to store the oven temporarily, as dust and moisture
can damage the appliance.
EN 27
Publicité
