Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Changing settings during the progress
•
During progress, touching the navigation keys will show the active area. The selected setting
can now be changed. After confirmation with the confirm key the progress screen will be
shown with the changed settings.
•
After 5 seconds without actions the progress settings are cancelled and the display will
return to the progress screen.
Culisensor (when available)
If the culisensor is plugged in, the culisensor screen will be shown and a small culisensor icon
will appear next to the time. The oven operates until the food core reaches the set temperature.
The core temperature is measured by means of the temperature probe.
1. Remove the rubber cap from the socket (right upper corner of the oven cavity).
2. Put the culisensor plug in the connection and insert the culisensor completely into the food.
The display will show the culisensor screen and icon.
3. Set the function and temperature. Instead of the time, you need to set the core temperature
(between 30 -100 °C).
4. Start the progress by touching the confirm key.
5. During cooking, the rising temperature of the core will be displayed (the desired core
temperature may be adjusted during the cooking process).
6. When the set core temperature is reached, the cooking process will stop. An acoustic signal
will sound, which you may turn off by touching any key. After one minute, the acoustic signal
will be switched off automatically. The current time appears on the display.
Please note!
•
Always place the culisensor's entire metal sensor in the dish.
•
After the cooking process always replace the rubber cap on the culisensor's connection.
•
Only use the culisensor in your oven.
•
Ensure that the culisensor does not come into contact with the heating element during
cooking.
•
The culisensor will be extremely hot after the cooking process. Be careful! Avoid burns.
EN 20
Publicité
