Operation; Battery Installation & Usage - TXED BIKE E POWER PRO XV 27.5+ Mode D'emploi Et D'entretien

Warning: do not wash this electrical bicycle direct with spraying water especially pressure
washers. Avoid water entering electric components as this may result in damage of the electric
components.

3. Operation

e Power Pro XV 27.5
is a revolutionary transport means, applying aluminum frame, Li-ion battery, a
super high efficiency electric motor and controller with electric pedal assistance system, to support normal
pedaling. The above mentioned equipment will ensure safe riding with excellent function and performance.
It is important for you to note the following guidelines to ensure getting the best possible experience from
your electric bicycle.
Checklist before riding
3.1.1 Please ensure tyres are fully inflated as indicated on the tyre wall, before riding.
Remember, performance of the electrical bicycle is directly related to the weight of the rider and
baggage/load, together with the stored energy in the battery;
3.1.2 Charge overnight, prior to riding the next day;
3.1.3 Apply chain oil periodically and clean if dirty or gummed up,- using degreaser, then wipe clean and
oil bicycle chain again.
4. Battery installation & usage
The electrical bicycle have the battery positioned onto the frame down tube (the battery pack is directly
connected to the controller box which is under battery bottom.
1. Put the controller to the bottom of down tube, and assure the cable of the controller and the other cables
like motor, display...connection well, then push it inside, as following: (Fig 2.0 ~ 2.2)
(Fig.2.2)
(Fig.2.0) (Fig.2.1)
25/55