Publicité
Les langues disponibles
Les langues disponibles
4. Using the Timer button (B), you can set starting and stopping times for the appliance.
To do this, press the Timer button (B); lamp (2) will light up. If you do this while the
appliance is not in operation (but with the plug in the socket), you will set the starting
time; if you do this while the appliance is in operation, you will set the stopping time.
The number of hours set will appear on the display. Each time you press the "Timer"
button, an hour will be added (setting from 1 to 24 hours). You can cancel the timer
setting by setting the time to 0 (0 comes after 24). The time setting is "forgotten"
when you switch the appliance off manually, but is kept in memory if the appliance
stops because the reservoir is full or during the thawing process.
5. Desset Air 20: Pressing the fan speed button changes the fan speed from high to low
and back. The lamp indicates the operational capacity.
6. Desset Air 20: Pressing the clean dryer button will continually dehumidify the
appliance at a high fan speed.
7. Make sure that you then remove the plug from the socket after use.
Drainage
While the water tank is full, the compressor will stop for self-protection and the water full
indicator will turn on and A tone will sound 15 times to warn the user that the reservoir
needs emptying. To do this, press the sides of the reservoir lightly with both hands, and
pull it carefully and straight out of the appliance. After empting the water tank, place the
water tank into space.
Please note: in case, the water tank has not been positioned well, the water full indicator
keeps burning. The equipment does not work.
Attention!
Do not remove the float from the reservoir.
No full reservoir signal will then be given and
water will be able to leak out of the tank.
If the reservoir is dirty, clean it with cold or
lukewarm water. Don't ever use volatile
chemicals,
scouring
pads,
gasoline,
22
Publicité
