Publicité
Les langues disponibles
Les langues disponibles
4.
Do not perforate any of the components of the cooling circuit and do not set light to
the device
5.
If the device is installed, working or stored in an un-ventilated you must take
measures to prevent fire or explosions caused by leaked coolant. Ensure that there
are absolutely no sources of ignition (such as fire, heaters, sparking electrical
equipment, lit cigarettes, etc.) in the same room!
6.
The device must be stored in such a way that mechanical defects are prevented.
7.
Do not install, operate or store the device in a room smaller than 4m².
8.
R290 is odourless, which means that you cannot smell leaks!
9.
Persons working on the cooling circuit must be in possession of the correct
qualifications that state the person in question is competent to use coolant in
accordance with a special evaluation that is recognised by the sector association.
10. The repairs must be executed on the grounds of the recommendations of the
manufacturer of the device. Maintenance and repairs that require the assistance of
other qualified persons must be executed under supervision of someone who is
specialised in the use of flammable coolant.
Description
1.
Front panel
2.
Air outlet
3.
Handle
4.
Control panel
5.
Filter
6.
Back panel
7.
Water tank
8.
Rubber feet (Desset Air 10)
Castors (Desset Air 20)
9.
Electric cable
19
Publicité
