Husqvarna PG 510 Manuel D'utilisation page 8

To do a check of the emergency stop
1. Push the emergency stop button (A) and make sure
that the motor stops.
A
Introduction
WARNING:
product, you must read and understand the
safety chapter.
Product positions
Operation position
Servicing position
CAUTION:
servicing position on a horizontal surface.
8
B
Operation
Before you operate the
Only put the product in the
2. Turn the emergency stop button clockwise (B) to
disengage.
Safety instructions for maintenance
• Keep all parts in good condition and make sure that
all fixtures are correctly tightened.
• Do not use a product that is damaged or does
not operate correctly. Do the safety checks,
maintenance and the servicing as given in this
manual. All other maintenance work must be done
by an approved service agent.
• Stop the motor and disconnect the power plug when
you replace the diamond tools.
• Do the inspection and/or maintenance with the motor
stopped and the power plug disconnected.
• Do the maintenance to make sure that the product
operates correctly. Refer to
page 14 .
Tilted transport position
Daily maintenance on
1146 - 003 - 21.03.2024