CLAS HU 8011 Mode D'emploi page 32

HU 8011
MAINTENANCE STATION FOR AUTOMATIC GEARBOX
Filling the oil sump
Converter oil replacement
Oil introduction for level
32
By clicking on the pre-configured quantity «2.5» (in Litres) a
drop-down menu opens to modify the quantity, which can
be configured as required by pressing the + and – keys.
When the required quantity has been set, press arrow
(confirm). Press the «FILL CRUNCH» button to start filling
the crankcase with clean oil.
After connecting the ATF hoses according to the database
procedures, start the engine as indicated by the scrolling
message and follow the instructions provided as described
in the previous paragraph.
By clicking on the pre-configured quantity «4.5» (in Litres)
a drop-down menu opens to modify the quantity, which can
be configured as required by pressing the + and - keys. When
the required quantity has been set, press arrow (confirm).
Press the «REPLACE CONVERTER OIL» button to start the
process of replacing the used oil in the converter by injecting
the same quantity of new oil.
After connecting the ATF hoses according to the database
procedures, start the engine as indicated by the scrolling
message and follow the instructions provided as described
in the previous paragraph. Then follow the instructions in the
previous paragraph.