CLAS HU 8011 Mode D'emploi page 30

HU 8011
MAINTENANCE STATION FOR AUTOMATIC GEARBOX
SERVICE
Manual procedures
Press the «MANUAL PROCEDURES» button to access the menu for performing all the revision
functions manually and separately. So you can select each operation by pressing the corresponding
key.
Use of additives
30
Press the «SERVICE» button to access the maintenance procedures
menu.
By clicking on the pre-configured quantity «500» (the
quantity is in millilitres) a drop-down menu opto
modify the quantity, which can be configured as required
by pressing the + and - keys.
When the required quantity has been set, arrow press
(confirm)
Press the «ADDITIVE INTRODUCTION» button to start the
additive introduction phase.
After connecting the ATF hoses following the database
procedures, start the engine as indicated by the scrolling
message and follow the instructions provided as follows.