AL-KO HW 5000 FMS PREMIUM Manuel D'utilisation page 21

Display indications
Display
A rotating X behind the normal symbolises that the pump is ON
7.2 Additional functions
Display
467777_i
Switching condition
Pump switches on and
starts to draw water.
Pump does not switch
on after self-test. In op-
eration mode, the pump
does not switch on.
After 90 seconds dry
running, the pump
switches off.
Pump running.
Pump switches off.
Pump switches on.
Switching condition
Pump running.
Pump running.
Function / action
Initial commissioning Pump filled with water, suc-
tion and pressure side connected, water present on
the suction side. Pump connected to mains. Closing
off devices in the pressure line are open.
Top up with air and then press the SET button. Carry
out the initial commissioning again. Air pressure, see
"Technical data".
Running text: TOP UP 1.5 BAR
Check the suction line and then press the SET but-
ton. Carry out the initial commissioning again.
Running text: CHECK WATER INFEED
Pump delivering water. Storage vessel being filled.
Part of the water is being drawn off.
Pump has achieved the set switch-off pressure.
Pump has achieved the set switch-on pressure.
Function / action
Flow rate: Press the MODE button until the flow rate
appears.
Running text: FLOW RATE
Total water quantity pumped: Press the MODE
button. Displays the volume of water already
pumped. Rest not possible.
Running text: TOTAL VOLUME
21