Qilive Q.6609 Mode D'emploi page 11

5. USE
FIRST USE
Cleaning the Interior
Before using the appliance for the first time, wash the interior and all internal
accessories with lukewarm water and a mild soap. Dry thoroughly. This will
clear the typical smell of a brand-new product.
IMPORTANT! Do not use detergents or abrasive cleaning materials as these
will damage the finish.
Temperature Setting
IMPORTANT! If the appliance has been moved, wait at least four hours for
fluids inside to balance before plugging it in and turning it on.
■ Plug in your appliance.
■ The internal temperature is controlled by a thermostat. There are eight
settings (see Figure 13). Setting 1 is the warmest temperature and 7 is the
coldest temperature setting. When set at 0, the appliance is turned off. When
set at 7, the compressor does not stop.
■ The appliance may not operate at the correct temperature if it is in a
particularly hot location or if you open the door frequently.
■ The appliance is not suitable for freezing foods. When starting up your
appliance after a period of time when it has not been used, turn the settings
up to MAX and wait approximately two hours before filling the refrigerator
with food. Then set the thermostat to the setting that suits your current
climate.
IMPORTANT! In the event of accidental warming of the fridge temperature, for
example due to a power failure, and the power has been off for longer than 7.5
hours (without the door being opened), the food must be eaten quickly, or if raw,
cooked.
11
EN