Qilive Q.6609 Mode D'emploi page 10

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable feet.
EN
7. Remove aid-closers from bottom of upper and lower doors, then take new
ai-closers from accessary bag and install them to left side.
8. Place the door back on.Ensure the door is aligned horizonally and vertically
so that the seals are closed on all sides before finally tightening the top
hinge.
9. Insert the hinge bracket and secure it to the top of the unit.
10. Use a spanner to tighten it if necessary
11. Put the hinge cover and the screw cover back.
12. Detach the fridge and the freezer door gasket and then attach them after
roating.
10