Proline TH PRIMO 45 FULL Manuel D'instructions page 79

3. Remove four screws from the inside of the dishwasher door and then fix the furniture
door to the dishwasher door by inserting and tightening the four long screws.
Adjusting the Tension of the Door Spring
The dishwasher door is attached to springs.
They are set at the factory to ensure that
they are at the proper tension, so that the
door can be opened and closed smoothly.
After the furniture door has been fitted, you will need to adjust the tension of the door
spring.
Use an Allen key (not supplied) to rotate the adjusting screw or either tighten or loosen
the steel cable.
The spring tension is correct when:
a) The door remains horizontal in the fully opened position.
b) You are able to close the door easily.
1 0