Proline TH PRIMO 45 FULL Manuel D'instructions page 87

Filling with salt
Unscrew the cap from the salt container by turning it anticlockwise.
Place the supplied funnel so the end fits into the opening of the salt container. Load
about 1.5kg of salt into the salt container.
Screw the cap back clockwise.
NOTE: The salt container must only be refilled when the refill salt indicator light
illuminates. Depending on how fully the salt dissolves, the refill salt indicator light
may still be on even though the salt container is filled.
Using the Rinse Aid and Detergent Dispensers
The rinse aid helps the dishes dry faster and prevents the
formation of scale deposits and staining. It is automatically
added to the water during the final rinse cycle.
The detergent and rinse aid dispensers are located on the
inner part of the door: the detergent dispenser is on the
left, and the rinse aid dispenser is on the right.
Adding the rinse aid
Rotate the dispenser cap anticlockwise and remove it.
Add the rinse aid until the container is full.
The optical level indicator on the side of the cap should be completely dark.
Replace the cap and turn it clockwise.
NOTE: Refill the rinse aid when the optical level indicator becomes clear again, or when the
rinse aid indicator light illuminates.
1
Adjusting the rinse aid dispenser setting
The factory setting for the dishwasher is 4 and you can choose among 6 settings.
The amount of rinse aid dispensed is proportional to the selector position.
2 3
1 8