Dolmar AH-1852H Manuel D'instructions page 6

ENGLISH (Original instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. Switch trigger A
6. Switch trigger B
7. Lock-off button
8. Indication lamp
9. Trimming direction
10. Hedge surface to be trimmed
11. Tilt the blades
SPECIFICATIONS
Strokes per minute (min
Overall length
Rated voltage
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
..... Read instruction manual.
................... Do not expose to rain.
Cd
............ Only for EU countries
Ni-MH
Li-ion Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for trimming hedges.
6
Explanation of general view
12. String
13. Press
14. Chip receiver
15. Nut
16. Shear blade
17. Hooks
18. Fit the hooks into groove
19. Grooves
20. Press the levers on both sides
21. Unlock the hooks
22. Screws
Model
Blade length
-1
)
Net weight
General Power Tool Safety
END013-2
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS HEDGE TRIMMER
SAFETY WARNINGS
1. Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
2. Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure the
switch is off when clearing jammed material. A
moment of inattention while operating the hedge
trimmer may result in serious personal injury.
3. Carry the hedge trimmer by the handle with the
ENE014-1
cutter blade stopped. When transporting or
storing the hedge trimmer always fit the cutting
device cover. Proper handling of the hedge trimmer
will reduce possible personal injury from the cutter
blades.
23. Under cover
24. Sponge
25. Washer
26. Gear
27. Sleeves
28. Groove
29. Blade cover
30. Grease
31. Blade
AH-1852H
520 mm
1,350
938 mm
3.3 kg
D.C.18 V
GEA010-1
GEB062-4