Switching The Appliance On And Off - Angelo Po 091FR1ED Manuel D'utilisation Et D'installation

ACTIVATES/DEACTIVATES THE TEMPERATURE HOLDING
(MELTING) FUNCTION
Proceed as follows.
1 - Press key (E) to activate the temperature hold-
ing (melting) function.
The light (Q) comes on.
2 - Press key (E) to deactivate the temperature
holding (melting) function.
The light (Q) goes out.
IDM-39619400600D.tif

SWITCHING THE APPLIANCE ON AND OFF

Lighting
1 - Operate the appliance's master switch to con-
nect it to the electrical mains.
The mains light (P) comes on.
2 - Press key (B) to set the appliance in "stand-by"
mode.
The mains power on light (P) goes out and the
display (A) shows the screen shown here.
3 - Press the key (B) to switch on the appliance
and start the cooking cycle.
The cooking temperature set will appear in red
on the display (A).
B
P
- 11 -
Important
The temperature holding function is always
activated whenever a heating operation is
started with the real temperature in the well
below 90°C.
Q E
Turning off
1 - Keep the key (B) pressed for about 6 sec-
onds to stop the cooking cycle and switch the
appliance off.
The mains light (P) comes on.
2 - Cut off the mains electricity supply using the ap-
pliance's master switch.
A
IT
GB
DE
FR
ES
IDM-39619400700A.tif
English