Installing Accessories - Angelo Po 091FR1ED Manuel D'utilisation Et D'installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Screw the feet (A) onto the structure in the connec-
tion points.
LEVELLING
Adjust the floor-mounted feet (A) to level the appli-
ance.
ASSEMBLY APPLIANCES IN BANKS
To assemble appliances in banks (side by side)
proceed as described below.
1 - Pull off the knob (A).
2 - Undo the screws (C) and remove the control
panels (B).
3 - Apply masking tape to the edges to be placed
side by side.
4 - Apply food-approved sealant to the edges to be
placed side by side.
5 - Place the appliances side by side.
6 - Connect the appliance using the screws and
nuts (D-E).
7 - Remove the excess sealant and the masking tape.
8 - Apply the sealant to the inside of the lid (F), and
fit it to cover the fixing zone.
9 - Replace the control panels (B) and the knobs
(A) on completion of the operation.

INSTALLING ACCESSORIES

A
A
C
D
- 21 -
A
IDM-39614401500.tif
IDM-39614401600.tif
B
F
E
IDM-39614401700.tif
IT
GB
DE
FR
ES
English

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

191fr2ed

Table des Matières