Angelo Po 091FR1ED Manuel D'utilisation Et D'installation page 38

STARTING AND STOPPING THE COOKING CYCLE
To start and stop the appliance, proceed as follows.
Starting
1 - Switch on the appliance (see page 11).
2 - Press key (B) and then key (E) to activate the
oil "melting" procedure.
When the preheating temperature is reached
the beeper sounds.
3 - Press key (E) to deactivate the "melting" func-
tion.
The temperature is maintained at 90°C until
cooking starts.
4 - Press key (C) to activate the temperature input
mode.
5 - Press keys (F-G) to set the cooking temperature.
the data set on the control panel are retained in
the memory until the electricity supply is
turned off.
IT
GB
DE
FR
ES
English
P B
C F
- 12 -
6 - Press key (E) to terminate the temperature
maintenance function.
7 - Press button (B) to start the cooking cycle.
Lights (P-Q) flash while the oil is heating to the
temperature of use, and then remain constantly
on.
8 - To display the temperature set during cooking,
press key (C).
Stopping
1 - Press key (B) to stop the cooking cycle.
Important
If the electricity supply is cut off for less
than 20-40 seconds, the cooking cycle re-
starts automatically.
If the blackout lasts more than 40 seconds,
press key (B) to restart the cooking cycle.
A Q
E
G
IDM-39619400700B.tif