Publicité
Connecting Machine to Power Supply
The power switch should be off. Before
connecting the power cord/foot control, make
sure the voltage and frequency shown on the
machine are identical to your electrical power.
Insert the machine/foot control plug into the
machine and the power supply plug into the
wall.
For Your Safety
1. While the machine is in operation, always
keep your eye on the sewing area and do
not touch any moving parts – needle(s),
flywheel, movable cutting blade, loopers,
etc.
2. Always switch off the power switch and
unplug from the power supply:
when leaving the machine unattended
•
when attaching or removing parts
•
when cleaning the machine.
•
3. Do not place anything on the foot control.
18
Publicité
