Publicité
Les langues disponibles
Les langues disponibles
ELECTRICAL HOOKUP FROM THE HOUSE TO PUMP AND PRESSURE TANK
10. Thread the cable from the house electrical
service through one of the holes in the side
of the pressure switch and tighten down the
electric wire strain relief.
CAUTION: Do not crush wire. (Fig. 10)
11. Connect the two wires from the house electrical
service to the outside pressure switch terminals
(L1 and L4). (Fig. 11)
12. Thread the cable from the control box through
the remaining hole in the side of the pressure
switch and tighten down the electric wire strain
relief.
CAUTION: Do not crush wire. (Fig. 12)
13. Connect the two wires from the control box to
the inside pressure switch terminals (L2 and
L3). (Fig. 13)
10
11
12
13
18
Copyright © 2023 Flint & Walling. All rights reserved.
L1
L4
Strain Relief
L1
L4
L2
L3
IL1162
L1
L4
L2
IL1165
L3
IL1167
Publicité
