CLEANING AND MAINTENANCE
Turn the oven off and remove the power plug from the mains socket before cleaning.
Risk of electric shock !
Penetrating moisture may cause an electric shock. Do not use any high-pressure
cleaners or steam cleaners.
Risk of burns !
Never clean the appliance immediately after switching off. Let the appliance cool
down.
To ensure that the different surfaces are not damaged by using the wrong cleaning
agent, observe the information in the table. Do not use
§ sharp or abrasive cleaning agents,
§ metal or glass scrapers to clean the glass in the oven door,
§ metal or glass scrapers to clean the door seal,
§ hard scouring pads and sponges,
§ cleaning agents with high concentrations of alcohol.
Wash new sponge cloths thoroughly before use.
Allow all surfaces to dry thoroughly before using the appliance again.
Area
Stainless steel
front
Plastic front
Door panels
Door handle
Cleaning
Hot soapy water :
Clean with a dish cloth and then dry with a soft cloth. Remove
flecks of limescale, grease, starch and albumin (e.g. egg
white) immediately. Corrosion can form under such flecks. Do
not use glass cleaners or metal or glass scrapers for cleaning.
Hot soapy water :
Clean with a dish cloth and then dry with a soft cloth. Do not
use glass cleaners or metal or glass scrapers for cleaning.
Glass cleaner :
Clean with a dish cloth and then dry with a soft cloth. Do not
use a glass scraper.
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth.
EN-25