Publicité
Les langues disponibles
Les langues disponibles
Ÿ
Place the tray and wire rack at the same level on both sides, make sure they are in a
horizontal and stable position.
Ÿ
A steam cleaner is not to be used.
Ÿ
WARNING: Ensure that the appliance is switched off before replacing the lamp to
avoid the possibility of electric shock.
Ÿ
The lamp inside the product is used for lighting of the product. This lamp is not
suitable for household room illumination.
Ÿ
The appliance must not be installed behind a decorative door in order to avoid
overheating.
Ÿ
The plug must be remained easily accessible after installation of the appliance.
Ÿ
Regarding the instructions for all necessary spaces with dimensions, the method of
fixing and how the appliance is to be fixed to its support, refer to the section
"INSTALLATION".
Ÿ
The means for disconnection must be incorporated in the fixed wiring in accordance
with the wiring rules.
Ÿ
The appliance shall be installed in accordance with national wiring regulations
NF C 15-100.
Ÿ
Regarding the detailed instructions for the safe use of the appliance, the
precautions during user maintenance and bulb replacement, refer to the sections
"OPERATION" and "CLEANING AND MAINTENANCE".
Ÿ
Regarding the method of fixing and cables connection, refer to the section
"ELECTRICAL CONNECTION".
Ÿ
After each cooking cycle, the cooling fan will continue to run for a while to ensure
quick cooling and safe operation of the oven.
Ÿ
The door should preferably be closed in all cooking modes.
Ÿ
Do not hang any cloth or garment to the handle of the oven.
Ÿ
Do not line the oven's cavity with aluminium foil for easier cleaning: The oven may
overheat and the enamel coating of the cavity may be damaged.
Ÿ
The fixed wiring insulation must be protected, for example, by insulating sleeving
having an appropriate temperature rating.
Ÿ
When in Pyrolytic Self-cleaning mode, all accessories must be removed from the
chamber.
EN-3
Publicité
