Télécharger Imprimer la page

Hansgrohe Focus E 043690 Serie Instructions De Montage / Mode D'emploi / Garantie page 2

Publicité

2"
2¾"
1¼"
2¼"
1¼"
1¼"
O.D.
This unit meets or exceeds
the following:
• ASME A112.18.1
• CSA B125.1
• ICC/ANSI A117.1
• ADA Compliant
• Section 116875 of the California
Health & Safety Code
• Listed by IAPMO for use in the US
and Canada
2
5⅛"
4¾"
2"
1⅛"
½
8"
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
Hole size in mounting surface
spout
valves
Max. depth of mounting surface
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends
that this unit be installed by a licensed,
professional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• This faucet requires ½" hot and cold supply
lines (not included).
• Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
Tools Required / Outiles Utiles
/ Herramientas Útiles
9 mm
16 mm
2 mm
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
1.5 GPM
1⅜"
1¼"
1⅜"

Publicité

loading