Eneo PXB-2080MIR D Guide D'installation Rapide page 21

Assembly Screw: 4x14mm
Torque Wrench
CAUTION:
Extreme care should be taken NOT to scratch the window in front
of lens.
Care should be taken the cable is NOT to be damaged, kinked or
exposed in the hazardous area.
Do not expose the camera directly to a strong light source such
as the sun or spot light.
Pan & Tilt adjustments
• Unlock the screw on the camera bracket through using the torque wrench supplied
• Set the camera's viewing angle then lock the screw on the bracket.
Mounting Screw 1: 4x30mm
4
1
2
3
Cable exit
EN
21