Eurocave 1000 Serie Mode D'emploi page 19

5 - LAYOUT AND LOADING ADVICE
Layout
Each shelf can be used in sliding or storage version.
• Wooden locking pins in front holes: storage position
• Wooden locking pins in back holes: sliding position.
Configurations`
Configuration of a shelf in storage position:
To store bottles on a storage shelf, proceed as follows:
- Insert the shelf in the desired location.
- Place a wooden locking pin in each of the 2 holes located approximately 15 cm from the front of the shelf, on the right and left of the upper
side: these pins fix the shelf with respect to the thermoformed wall and prevent any inappropriate movement of the shelf (see diagram).
- Start by laying the bottles in each recess of the back row, bottle base towards the back.
- Continue with the front row, laying the bottles in the opposite direction.
- Continue filling the shelf by stacking the bottles, taking care to ensure that no bottles touch the back wall. – One storage shelf can hold
a maximum of 3 rows of 8 bottles, i.e. 24 "traditional" Bordeaux bottles (3 I kg).
The shelf is designed for storing traditional Bordeaux bottles.
Configuration of a shelf in sliding position:
To store bottles on a sliding shelf, proceed as follows:
- Insert the shelf in the desired location.
- Place a wooden locking pin in each of the 2 holes located 4 cm from the back of the shelf, on the right and left of the upper side: when you
pull the shelf out, these pins prevent the shelf from coming all the way out of the cabinet (see diagram).
- Pull the shelves in the stop position towards you.
- Start by laying the bottles in each recess of the back row, bottle base towards the back.
- Continue with the front row, laying the bottles in the opposite direction.
- A sliding shelf can only hold a single row of bottles (maximum of 8 "traditional" Bordeaux bottles).
- In the case of a mixed layout, for optimal accessibility, we recommend that you place the sliding shelves in the central section of the appliance.
Additional shelves can be purchased from your retailer.
Never pull out more than one loaded sliding shelf at once.
Please note that if you do not have enough bottles to fill the wine cabinet, it is preferable to distribute the load
over all the shelves available, and avoid loading the bottles "all at the top" or "all at the bottom".
EN
-7-