Sony Trinitron GDM-W900 Mode D'emploi page 30

Adjustments (Normal mode)
Adjusting the color
temperature
The adjustment data becomes the common setting for all
input signals received.
1
Press the COLOR button.
The "COLOR" OSD appears.
COLOR
2
Press the >?// buttons to select a color
temperature.
The factory settings are:
5000K, 6500K, 9300K
Adjusting the color temperature
Press the ¨./> button to select "VARIABLE," and
adjust by pressing the >?// button.
The figure of the adjusted color temperature changes.
The OSD automatically disappears after about 30 seconds.
To turn off the OSD, press the COLOR button again.
To reset, press the RESET button while the OSD is on. The
selected color tempetarure is reset. The adjustments you
made in the expert mode (page 15) are also reset.
Resetting to the factory-
preset levels
1
Press the button of the OSD you want to reset to the
factory setting.
2
When the parameters are arranged in vertical row in
the OSD, select a parameter you want to reset by
pressing the ¨./> buttons.
3
Press the RESET button.
RESET
Resetting all adjustment data
When there is no OSD displayed, press and hold the
RESET button for more than two seconds.
All adjustment data including the brightness and contrast
are reset to factory-preset levels.
12
COLOR
COLOR TEMPERATURE
5 0 0 0K 6 5 0 0K 93 0 0K
VAR I ABLE
SELECT SET / ADJUST
Resetting the picture size, position,
moire, and geometry* at the same time
When there is no OSD displayed, press and hold the
RESET button for one second.
The above items of the current input signal are reset to
factory-preset levels.
* The "Rotation" adjustment (pages 10, 14) is not reset.